Instead of looking at number of panels, look at the total wattage. How many watts does it take to charge your power station? 30W-100W portable solar panels like these should work well for that. You could even go a little higher than what you need because of things like inline charging and dual charging, so you can charge multiple devices at once and still keep the power station topped off. That’s a good starting point.

Next, ask yourself how much wattage you could regularly use it for on a normal day. Ignore high-wattage appliances at first, like refrigerators, a/c, heater, stove, coffee pot, hairdryer, etc. Basically anything that produces high temperatures or has a motor a motor. But what else could you power on it? Chargers, homelab, router, etc.? There’s your second expansion. Probably some larger one-off panels and a couple power stations

Lastly, ask yourself what wattage you would need to run all your necessities in the case of an emergency with a long-term power outage. That’s when you calculate the high-wattage appliances. This will probably require a full rooftop solar installation.

So no need to dive all the way in at first if you can’t afford to yet, but don’t let that discourage you from getting some smaller panels to start.

Lol, def can become an obsession. First hand experience there.

I’ve wanted a whole house PV system for a long time, and this is just me finally getting around to making it happen. SO and I were talking about getting a backup generator installed, but that would have been about $7,000 for something that would only get used two or three times a year since our power doesn’t go out often (we have no heat or ability to cook when the power goes out, and it’s always in the dead of winter when we lose power). The PV system I sketched out was about $9.000, but in addition to covering us during outages, we could use it daily to reduce electric bill so, unlike the generator, this would pay for itself over time.

SO finally came around to my way of thinking, so here we are lol. My limiting factor is usable roof area. Of the roof that’s south facing, only about 14x20 feet of it is suitable for mounting panels. There’s a west-facing gable, but it’s blocked most of the time by a tree. The east-facing side of the gable is available, but it’s pretty much always foggy in the mornings here, so it wouldn’t add much to the system.

Unless I build a ground mount setup in the back yard, we’re pretty much at the limit of how many panels I can buy. I’m kind of glad for that because otherwise I’d just keep buying them.